1. 有效清除三元催化器表面的(de)積碳及殘留物。

2. 恢複三元催化器的(de)淨化功能，降低尾气排放。

3. 提升燃油燃燒效率，提高冷車啟動性能，降低油耗，恢複發動機動力。

4. 延长三元催化器的(de)使用壽命，減少维護綜合成本。

優道三元催化高效清洗劑

品牌：UD優道

系統：進排气系統

産品編号：UD-01.265/325ml

企業标準：Q/YKJH 8

産品僅供4S店使用

産品特点：

1. 有效清除三元催化器表面的(de)積碳及殘留物。

2. 恢複三元催化器的(de)淨化功能，降低尾气排放。

3. 提升燃油燃燒效率，提高冷車啟動性能，降低油耗，恢複發動機動力。

4. 延长三元催化器的(de)使用壽命，減少维護綜合成本。

使用方法：

1、啟動發動機至正常工作温度，

2、用專用油門固定器将引擎轉速固定在2500轉

3、尋找、拆開节气門後的(de)真空管（有真空吸力），靠近节气門第一个管口最佳，

4、把産品瓶口打開連接在專用清洗设備上（或倒入设備铁罐中），並把设備出液透明软管與汽車的(de)真空管对接，

5、打開设備開關，将流量調整開關調到産品成滴入裝狀進入真空管为正确，清洗时間为25-30分鐘最佳，

6、整瓶産品用完，除碳时間完成，拔出連接汽車真空管接头並恢複原狀，

7、将油門固定器拆下，以每500轉/10秒輕緩加油，逐漸加至3000轉，以稍快速度重複上述動作。

8、待進排气聲順暢时再排碳15分鐘，除碳中及排碳时絕不可以重踩油門，排碳後必须進行路試。

Product features:

1. Effectively remove the carbon deposition and residue on the surface of the ternary catalytic converter.

2. Restore the purification function of the three-way catalytic converter and reduce the exhaust emission.

3. Improve fuel combustion efficiency, improve start-up performance of cold vehicle, reduce fuel consumption and restore engine power.

4. Extend the service life of three-element catalytic converters and reduce the comprehensive maintenance cost.

Usage:

1. Start the engine to the normal operating temperature,

2. Fixed the engine speed at 2500 revolutions with special accelerator fixator

3. Look for and open the vacuum tube behind the throttle (with vacuum suction). It is best to be close to the first pipe opening of the throttle.

4. Open the product bottle mouth and connect it to the special cleaning equipment (or put it into the equipment tin), and connect the device's liquid outlet transparent hose to the vacuum tube of the car.

5. Turn on the device switch, and adjust the flow rate adjustment switch to the product to drip into the vacuum tube. The cleaning time is 25-30 minutes.

6. When the whole bottle of product is used up, the decarbonization time is completed, and the vacuum tube connector of the car is pulled out and restored to its original state.

7. Remove the accelerator fixator and gently refuel every 500rpm / 10s, gradually add to 3000 RPM and repeat the above action at a slightly faster speed.

8. When the inlet and exhaust sound is smooth, the carbon shall be discharged for another 15 minutes. In addition, the gas pedal shall not be pressed again when the carbon is removed and the road test shall be conducted after the carbon is discharged.